Tempered and annealed glass are used in a wide variety of applications, each with its own set of characteristics and advantages. The softer of the two is annealed glass, often known as ordinary glass. Tempered glass panels Chicago, often known as toughened glass, is one of the most durable varieties of glass. It is, in fact, up to five times tougher than most other materials, even annealed glass. When picking between annealed and temper glass Chicago for your next project, there are numerous important factors to consider.
Annealed Glass: Characteristics and Advantages
Glass is thermally treated and subsequently cooled during the annealing process to alleviate internal tensions produced during the production process. The annealing temperature for most glass products is between 850 °F and 900 °F, which is the stress-relief point of the glass. The components are then heat-soaked until the temperature is uniform throughout and the stress is sufficiently relaxed. Annealed glass is less expensive than tempered glass since it does not have to go through as many procedures. Annealed glass is also very versatile and adaptable, enabling it to be made in a wide range of forms and patterns.
Key Characteristics and Benefits of Tempered Glass
Custom tempered glass Chicago is made by first cutting the material to size. The sharp edges are then smoothed using an abrasive, such as sandpaper. The glass is then heated to nearly 1,100 °F in a tempering oven. Following heating, the material is subjected to a few seconds of quenching, a high-pressure cooling technique in which air is directed at the surface of the glass tempering Chicago from many nozzles in various places. Tempered glass may also be produced by the exchange of ions on the glass surface caused by different substances. However, since this procedure is more costly, it is not utilized as often. Tempered glass shatters into tiny, square shards, making it much less likely to injure than annealed glass.